32U network rack, Pro5 Eko Line 1590x800x800 mm, color grey (RAL 7035)

Status: In Stock

32U network rack, Dynamic Basic 1590x800x800 mm, color grey (RAL 7035)

Roof is prepared for fan units (punched out entries)
Lockable pivot lever on front door
Base with punched out cable entry, covered with screwed metal plate

Karşılaştır

Description
The Racks of the Dynamic Basic Series were designed for the user friendly installation of active- and passive network components accompanied by a neat cable management. Each rack consists of up to 1.5 mm strong steel sheet material which ensures a very good stability as a robust steel construction due to special plate curving technique. The color is created by powder coating in grey (RAL 7035) and black (RAL 9005). For certain conditions, where the set-up location is difficult to reach, the rack can be disassembled. Doors can be easily detached and the door stop can be changed from right to left. Furthermore the roof is ready for the mounting of an air ventilation unit. Each rack contains 2 pairs (4 pieces) of 483 mm (19”) profile rails inside which are galvanized and with height unit marking (countable from both directions). They are variable in depth and connected with additional depth support bars to realize extensive 483 mm (19”) equipment installations. An important aspect for each installation is the cable management. The base of each rack is equipped with a punched out cable entry covered with a metal plate, whereas the base of 800 mm width racks gets extended with additional punched out cable entries with plastic covers left and right. These are also placed in the roof (1x for 600 mm width cabinets, 3x for cabinets from 800 mm width. An extensive portfolio of accessories for cable management, shelves, etc. will help to meet many requirements in daily use.

Technical details
Safety class rating IP20
Lateral metal struts front door with safety glass
Lock system with pivot lever on front door
120° door opening angle on the front door
1-point-locking-mechanism on the front door
Rear wall and side panels are lockable and detachable
incl. 4 pieces of leveling feet already pre-configured under the rack
483 mm (19“) profile rails mounted on the front- and rear side inside of the rack, galvanized
483 mm (19“) profile rails are adjustable in depth and with height unit marking
Base with punched out cable entry, covered with screwed metal plate
Base with punched out cable entries with plastic covers left and right
Roof with punched out cable entries with plastic covers
Roof is prepared for fan units (punched out entries)
Several earthing points for rack components
Incl. installation set (screws, cage nuts, washers)
Equipment mounting depth min.-max.: 430-750 mm
Rack is completely mounted
Cabinet type: Network cabinet
Color: light grey, RAL 7035
Depth: 800 mm
Front door: Glass door, single opening
Load capacity: 600 kg
Rear door: Steel door, closed, single opening
Side panels: Both sides
Units: 32
Width: 800 mm
IP protection class: IP20
Mounted: yes

Back to Top
Product has been added to your cart