7U wall mounting cabinet, pro3line, 420x600x600 mm double sectioned, pivotable, black (RAL 9005)

Status: In Stock

The 19-inch networking housing has 7 rack units for the installation of rack devices such as patch fields, switches, socket strips or shelves – The maximum installation depth is 44 cm
In addition to the lockable side walls, the fully swiveling housing ensures optimal accessibility – A separately available fain module can be mounted on the roof
The safety glass door has an opening angle of 210° – The door hinge can be switched from the left to the right – All doors and side walls are secured with locks against unauthorized access
For the installation of IT components, profile rails are provided in the front area of the cabinet – The back frame also has a 19” perforation for devices such as socket strips.
Insertion openings in the floor, roof and back wall of the network wall distributor facilitate individual cabling – Ideal for sub-distribution units with active devices and connection on the back side

Karşılaştır

Description
The Wall Mounting Cabinets of the Unique Series were designed for the user friendly installation of active- and passive network components accompanied by a neat cable management. Each rack consists of up to 1.5 mm strong steel sheet material which ensures a very good stability as a robust steel construction. The color is created by powder coating in grey (RAL 7035) and black (RAL 9005). Wall installation can be done easily. Separately leveling feet or castors are available for free standing purposes. Door and side panels are easy to detach and the door stop can be changed from right to left. The roof contains air ventilation slots for a better air circulation. Each wall mounting cabinet contains one pair (two pieces) of mounted 483 mm (19”) profile rails inside. They are galvanized, with height unit marking (countable from both directions) and variable in depth. Furthermore, the rear frame is outfitted with 483 mm (19”) punch outs. An important aspect for each installation is the cable management. The roof of each cabinet is equipped with a sliding cable entry panel with rubber sealing. Punched out cable entries with plastic cover are present on the rear wall and base. The rear frame is also equipped with brushes on top and base side. An extensive portfolio of accessories for cable management, shelves, etc. will help to meet many requirements in daily use.

Technical details
Safety class rating IP20
Lockable safety-glass door with steel frame
210° door opening angle
Housing is connected to rear frame with separate locking mechanism (incl. individual key)
102° pivotable angle of the housing from the frame
1-point-locking-mechanism on the front door
Side panels are lockable and removable
483 mm (19“) profile rails mounted on the front side inside of the cabinet, galvanized
483 mm (19“) profile rails are adjustable in depth and with height unit marking
Rear frame with 483 mm (19”) punch outs
Max. installation depth: 440 mm
Cable entry on the rear side and base with plastic cover and top with sliding cover
Rear frame with brush strip for cable entry on top and base
Roof is prepared for fan units (punched out entries)
Ventilation slots for active and passive ventilation and exhausting
Several earthing points for rack components
Incl. installation set (screws, cage nuts, washers)
Rack is completely mounted
Equipment mounting depth min.-max.: 375-440 mm
Cabinet type: Wall mounting cabinet
Color: black, RAL 9005
Depth: 600 mm
Front door: Glass door, single opening
Load capacity: 100 kg
Units: 7
Width: 600 mm
IP protection class: IP20
Mounted: yes

Back to Top
Product has been added to your cart